YL5070-32-HP

PATNERSHIP

Yasalink is an active company that wants to develop on a macro level. You can contact us to request cooperation and representation

+90 545 635 0849

YL5070-32-HP+Cambium4600C

YL5070-32-HP  +  Cambium 4600C

This antenna consists of a 0.72m  reflector, feeder, and antenna mounting bracket. The mounting bracket is designed for installation on a vertical pipe of diameter 35mm to 75mm. The precise antenna mounting bracket provides adjustment ranges of ±19° fine elevation and ±11° fine azimuth.

The installation, maintenance or removal of antenna systems requires qualified, experienced personnel. This installation instructions have been written for such personnel. Antenna systems should be inspected once a year by qualified personnel to verify proper installation, maintenance, and condition of equipment. YasaLink disclaims any liability or responsibility for the results of improper or unsafe installation practices.

Tools Required

ItemContentsQtyImage
1Combination Wrench, 13mm1Combination Wrench
2Screwdriver, cross-recess1Screwdriver

ItemContentsQtyImage
AReflector 0.72m
&
Mounting		1Reflector 0.72m & Mounting
B

Feeder

1Feeder

C

Screw M4x12, Cross, st

4Screw-Spring Washer

D

Spring Washer M4, st

4

E

Washer M4, st

4

F

Installation Guide

1
YL5070-32-HP-Installation

Installation

YL5070-32-HP-Install Feed to Reflector

1- Install Feed to Reflector

Install Feed [B] to Reflector [A] by:
[C] Screw M4x12; 4 pcs
[D] Spring Washer M4; 4 pcs
[E] Washer M4; 4 pcs

YL5070-32-HP-Attach Antenna to Mounting Pole

2- Attach Antenna to Mounting Pole

Follow the picture to attach antenna to mounting pole then place the U-bolts on the M8x120 Screws and tighten M8 nuts.

YL5070-32-HP-Adjust Azimuth and Elevation

3- Adjust Azimuth and Elevation

After an approximate alignment , both elevation and azimuth could be precisely adjusted by tightening/loosening the elevation and azimuth screws shown in picture.
When azimuth/elevation are set , tighten all nuts to approximately 14N-m (10 lb-ft).

TECHNICAL DATA SHEET

General Specifications

  • Model Number : YL5070-32-HP
  • Diameter (m) : 0.72
  • Polarization : Dual (Vertical and Horizontal)

Mechanical Specifications

  • Weight With Holder (kg) : 5.5 kg
  • Color : Metallic Red
  • Screws and Nuts : Dacromet Coating
  • Fine Azimuth Adjustment : ±11°
  • Fine Elevation Adjustment : ±19°
  • Wind Loading (km/h) : 200
  • Operating Temperature : -40 °C to 60 °C
  • Supportable Comparative Damp : 90%

Electrical Specifications

  • Input : 2 × N-Female
  • Frequency Range (MHz) : 5.9 GHz to 7.1 GHz
  • VSWR : 1.4:1
  • Impedance (Ω) : 50
  • Gain (dBi) : 32
  • 3dB Beamwidth : H-plane: 3.6° / E-plane: 3.6°
  • F/B Ratio (dB) : 40
Patterns